Results1
Notify me when product is re-stocked.

Your Email Address
Your Name

    • DBX 286s Microphone Preamp Processor
    • DBX 286s Microphone Preamp Processor
    • DBX 286s Microphone Preamp Processor
  1. DBX 286s Microphone Preamp Processor

    Retail Price: R4,503.00
    Your Price: R3,243.00
    Save: R1,260.00

    From R308.00 x 12 months
    with mobicred.co.za

    AudioMart lowest price guarantee click here
    Buy this item and earn 2,845 "My Audio Rewards" valued at R56.89.
The dbx 286s is a full featured Channel Strip Processor that delivers a studio quality microphone/instrument preamplifier and four processors that can be used independently or in any combination. Why mic up vocals and instruments through a noisy, blurry mixer? The sonically pristine dbx 286s Mic Preamp has all the features you need, including wide-ranging input gain control, switchable +48V phantom power, and an 80Hz high-pass filter to remove low frequency hum, rumble or wind. Use the patented dbx OverEasy compressor to transparently smooth out uneven acoustic tracks or deliver that classic 'in your face' vocal performance that only a dbx compressor can. Eliminate vocal sibilance and high frequency distortion from instruments such as cymbals with the frequency tunable De-Esser. Fine-tune the Enhancer HF Detail control to add sparkle and crispness to your tracks and make adjustments to the LF Detail control to add fullness and depth to vocals and bass instruments while cleaning up the muddy low midrange frequencies. And, the separate threshold and ratio controls on the Expander/Gate allow you to subtly reduce headphone leakage or radically gate noisy guitar amps.
Studio quality Mic Preamp/Channel Strip Processor
Classic dbx Compression puts great sound within easy reach
Frequency tunable De-Esser reduces sibilance and high frequency distortion
Enhancer increases the detail and definition of the high and low frequencies
Program adaptive Expander/Gate
Insert jack allows you to add an external processor
Full compliment of meters and status LEDs
+48V Phantom Power
Precision detented controls
Mic Preamp Connector XLR Floating balanced, Pin 2 Hot
Mic Preamp Input Impedance ~4.2kOhm
Mic Preamp gain 0dB to +60dB
Mic Preamp Phantom Power +48VDC, applied to XLR pins 2 and 3 through 6.81kOhm resistors
CMRR >40dB, typically 55dB
Mic Preamp max input level 0.2Vrms, Gain = 30dB
Mic Preamp Equivalent Input Noise (EIN) -125dBu, 22Hz-22kHz, 150Ohm source impedance
Input Connectors (line) Floating balanced, TIP Hot
Input Impedance (line) 10kOhm unbalanced, 20kOhm balanced
Max Input (line) >+21dBu, balanced or unbalanced
Input Gain Range (line) -15dB to +45 dB
Insert Connector 1/4" TRS: Normalled; tip is Send, ring is Return
Insert Impedance >5kOhm (ring-return); 100Ohm (tip-send)
Insert Max Level >+21dBu; >+20dBm (600Ohm load-tip)
Insert Noise <-84dBu, unweighted (20Hz-20kHz); LINE GAIN Control set to 0dB
Insert Distortion <0.01% THD, 20Hz-20kHz, +10dBu
Output Connectors 1/4" Balanced/Unbalanced TRS Connectors
Output Impedance 100Ohm unbalanced, 200Ohm balanced
Max Output >+21dBu, >+20dBm (600Ohm load)
Gain Adjustment Range -30dB to +10dB
Noise <-80dBu unweighted (20Hz-20kHz); Both Gain Controls set for 0dB, all processing controls OFF
Frequency Response 20Hz to 20kHz, +0.5, -0.5dB
THD <0.08%THD, 20Hz-20kHz, +10dBu, all Processing Controls OFF
Compressor Threshold Range -40dBu to +20dBu
Compressor Threshold Characteristic OverEasyŽ
Compressor Ratio >4:1 For input levels beyond 20dB above threshold
Max Compression 30dB
Compressor Attack Time Program-Dependent; >1s for small level increases, down to 10ms for larage increases
Compressor Release Time Program-Dependent; adjustable between approximately 1dB/sec and 75dB/sec
Compressor Distortion Typically <0.05%THD, 20Hz-20kHz, 15dB G/R, +10dBu Output, DENSITY @ 0
IMD SMPTE: <0.05%; 60Hz/7kHz 4:1, 15dB G/R, +10dBu Output Level, DENSITY @ 0
De-esser Characteristic Wideband Gain Reduction
De-esser Frequency Range 800Hz to 10kHz High Pass, 12dB/octave
De-esser Release Time 12dB/octave Program-Dependent; approximately 1mS/dB
Enhancer HF Detail Characteristic Program-controlled shelving equalizer, approximately 15dB maximum HF boost
Enhancer LF Detail Characteristic Bell-shaped boost @ 80Hz, bell-shaped cut @250Hz, ratio is approximately 2:1
Expander/Gate Threshold Range OFF to +15dBu
Expander/Gate Ratio Adjustable 1.5:1 to 10:1
Expander/Gate Max Depth >50dB
Expander/Gate Attack Time Program-Dependent, approximately 2mS (at maximum attenuation)
Expander/Gate Release Time Program-Dependent, approxiamtely 10mS/dB
Expander/Gate Dynamic Range Typically 105dB
Power Consumption 15W
Operating Voltage DO: 120VAC 60Hz, 100VAC 50/60Hz; EU: 230VAC 50/60Hz
Operating Temperature 0°C to 45°C (32°F to 113°F)
Dimensions 1.75" x 5.75" x 19" (4.5cm x 14.6cm x 48.5cm)
4.5 lbs/2.04 Kgs
Shipping Weight 6.54 lbs/2.97 Kgs

Product enquiry

Product:
Full Name:
E-Mail Address:
(Check Carefully!)
Enquiry:
Send copy to yourself:
Captcha:
CAPTCHA Image
  Reload Image
Enter Code*:
In Stock Delivery to a Main Centre Delivery to a Regional Area Delivery to a Remote Area Delivery to a Country out on South Africa
Product is In Stock at our Distribution Warehouse: Delivered to your door within 1-3 working days after payment is confirmed For bulky items & orders weighing more than 15kg's add 2 working days Delivered to your door within 4-5 working days after payment is confirmed Delivered to your door within 5-7 working days after payment is confirmed Delivered to your door within 7-14 working days after payment is confirmed
Shop by department
view our brands
My Audio Rewards
Follow Us
Follow Me on Pinterest
Instagram Follow on Instagram

Sign up for Hot Deals

Get all the latest specials delivered to your inbox